Product Overview — Part RE64094
The RE64094 is a precision-manufactured Rubber Mount component for demanding industrial and transportation applications. OEM-equivalent cab mount for John Deere backhoe loaders and wheel loaders. Cross-references to John Deere OEM part RE64094. The 3/8-16 threaded design allows direct bolt-up installation with standard US fastener tooling. Designed for continuous cab isolation on the most widely deployed utility equipment in North America.
Produced in our ISO 9001:2015 certified facility using advanced vulcanization processes and carefully selected elastomer compounds, part RE64094 meets the exacting requirements of original equipment manufacturers and aftermarket service providers. Every unit undergoes dimensional verification, hardness testing, and visual inspection before release for shipment to customers in the United States, Canada, Europe, and Asia-Pacific.
This component belongs to our Rubber Mount product line. Browse related products including T118458 and 211-4987 for complete system maintenance solutions.
Technical Specifications
| Property | Value | Standard |
|---|---|---|
| Part Number | RE64094 | OEM Specification |
| Hardness | 60 ± 5 Shore A | ISO 48-4 / ASTM D2240 |
| Tensile Strength | ≥ 18 MPa | ISO 37 / ASTM D412 |
| Elongation at Break | ≥ 350% | ISO 37 / ASTM D412 |
| Compression Set | ≤ 25% (22h/70°C) | ISO 815-1 / ASTM D395 |
| Temperature Range | -40°C to +80°C | Operational limits |
| Ozone Resistance | No cracking 168h | ISO 1431-1 |
| Fire Safety | EN 45545-2 HL2/HL3 avail. | EN 45545-2:2013 |
| Fatigue Life | >1,500,000 cycles | Dynamic fatigue protocol |
Applications
John Deere 310, 310SL, 410, 410K backhoe loaders; John Deere 544, 624 wheel loaders; John Deere 6000 and 7000 series agricultural tractors; North American utility contractor, municipality, and agricultural equipment fleets.
Our technical team can assess suitability for other equipment types. Contact us with the make, model, and serial number for a precise cross-reference confirmation before ordering.
Material & Quality Standards
- Base Polymer: Natural Rubber (NR) or NR/SBR blend — excellent resilience and low heat buildup
- Reinforcing Fillers: High-structure carbon black for controlled stiffness and wear resistance
- Protection Additives: Anti-ozonant wax and chemical antioxidant system for extended service life
- Bonding System: Chemically bonded rubber-to-metal interface exceeding bulk rubber strength
- EN 45545-2 Option: Halogen-free flame retardant meeting smoke toxicity requirements (railway grade)
Every batch produced under ISO 9001:2015 QMS with full material traceability. Certificates of conformance and material test reports available upon request.
Installation Guidelines
- Inspect on arrival: Verify part number RE64094. Check for transit damage or surface defects — reject any visually non-conforming component.
- Clean mating surfaces: Remove all rust, old rubber fragments, grease, and paint. Flat tolerance within 0.5 mm.
- Align correctly: Follow assembly drawing orientation. Incorrect orientation can cause premature failure.
- Torque fasteners: Use calibrated torque wrench and cross-pattern tightening sequence per OEM specification.
- Post-install check: Visual inspection for correct seating. Run equipment at low speed to verify absence of abnormal noise or vibration.